Products  Materials
|
|
|
|
|
No. |
Picture |
Products |
|
1
. |
|
Bitucell*
Uses
Bitucell is a compressible, non-extruding, bitumen impregnated fibreboard expansion joint filler suitable for forming joints in in-situ or precast concrete components, and to protect waterproof membranes against physical or
mechanical damage.
Forming structural expansion and separation joints in:
! Concrete pavements and floors
! Roads, ramps and runways
! Pedestrian areas
! Concrete retaining walls and bridges
! Concrete basement structures and subway
Supplier: AB-HAM Enterprise plc
 Download PDF file.
|
|
2
. |
|
Colpor 200*
Uses
For the horizontal & vertical sealing and maintenance of joints
in concrete roads, concrete runways and hard standings.
The excellent fuel resistance of Colpor 200 makes it particularly suitable for sealing areas where fuel and oil spillage might occur such as:
! Aircraft fuelling areas
! Oil terminals
! Garage forecourts
! Parking and cargo areas
! Docks and harbours
! Warehouses
Supplier: AB-HAM Enterprise plc
Download PDF file.
|
|
3
. |
|
Conplast NC (FOSROC)
Chloride free accelerating admixture
- To accelerate the stiffening and early strength gain of Portland cement concrete and mortar
- Typical applications include concrete or mortar placed in
cold weather and precast concrete
Supplier: AB-HAM Enterprise plc
Download PDF file.
|
|
4
. |
|
Conplast P505 (FOSROC)
High performance, slump retaining and water reducing admixture
- To improve the effectiveness of the water content of a concrete mix.
- At higher dosages to provide cost effective means of reducing concrete permeability and thereby reducing water penetration.
Supplier: AB-HAM Enterprise plc
Download PDF file.
|
|
5
. |
|
Conplast RP264* (FOSROC)
Retarding water reducing admixture
Uses
- To improve the effectiveness of the water content of a concrete mix.
- To help maintain the workability of readymixed concrete deliveries in hot weather.
- To extend working times of concrete.
- Particularly suitable for use in mixes with low cohesion.
Supplier: AB-HAM Enterprise plc
Download PDF file.
|
|
6
. |
|
Conplast SP430* (FOSROC)
High performance superplasticising admixture
Uses
! To provide excellent acceleration of strength gain at early
ages and major increases in strength at all ages by significantly reducing water demand in a concrete mix.
! Particularly suitable for precast concrete and other high early strength requirements.
! To significantly improve the workability of site mixed and precast concrete without increasing water demand.
! To provide improved durability by increasing ultimate
strengths and reducing concrete permeability.
Supplier: AB-HAM Enterprise plc
Download PDF file.
|
|
7
. |
|
Conplast UW*
Uses
Conplast UW is an admixture system specially designed to:
! Allows concrete to be placed underwater
! Increases the cohesion of concrete mixes and minimises washout
! Produces well compacted high quality concrete
Supplier: AB-HAM Enterprise plc
Download PDF file.
|
|
8
. |
|
Conplast W (FOSROC)
Accelerating, water reducing admixture
As an accelerator for use in concrete and cement mortars to
promote rapid strength development for early stripping of
formwork, and to assist in resisting of frost attack, ideal for cold winter working conditions.
Supplier: AB-HAM Enterprise plc
Download PDF file.
|
|
9
. |
|
Conplast WP200* (FOSROC)
High performance permeability reducer Uses
! Can be used solely or with Conplast WP400*† for waterproof, structural and precast concrete.
Advantages
! Does not incorporate bitumen.
! Provides integral protection, ensuring reduced
permeability throughout the concrete.
! Integral protection is maintained even if surface damage
occurs, unlike applied surface films or coatings.
! Lower water:cement ratio improves compressive strength at same workability.
! Fully compatible with certain Fosroc surface coatings and finishes.
Supplier: AB-HAM Enterprise plc
Download PDF file.
|
|
10
. |
|
Conplast WP400* (FOSROC)
Hydrophobic pore-blocking waterproofing admixture
Uses
Conplast WP400 will drastically reduce water absorption in structural and precast concrete. It is suitable for use in below ground structures, reinforced concrete in marine areas, piles, water retaining structures, manholes, waste water treatment and desalination plants.
Advantages
! Bitumen ammonia free system
! Provides integral protection, ensuring reduced
permeability throughout the concrete
! Integral protection is maintained even if surface damage occurs, unlike applied surface films or coatings
! Lower water:cement ratio improves compressive strength
at same workability
! Fully compatible with certain Fosroc surface coatings and
finishes
Supplier: AB-HAM Enterprise plc
Download PDF file.
|
|
