Products  Sanitary - Waterproofing
|
|
|
|
|
No. |
Picture |
Products |
|
1
. |
|
Brushbond TGP* (FOSROC)
Crystalline capillary waterproofing for concrete substrates. Brushbond TGP is an economical cementitious coating system designed for waterproofing concrete against low (less than 1 bar) positive or negative hydrostatic water pressure in a wide variety of structures such as:
�� Sewage treatment and water treatment plants
�� Water tanks
�� Concrete pipes
�� Manholes
Supplier: AB-HAM Enterprise plc
 Download PDF file.
|
|
2
. |
|
MASTERFLEX® 610 (BASF)
Water swelling waterbar for joints
suitable for all construction joints subject to hydrostatic pressure, on one or both sides. MASTERFLEX®
610 provide simple but efficient waterproofing of construction joints. Movements in the joint, e.g.
by shrinkage or settlement in the substrate, are taken up by the elastic profile of the MASTERFLEX® 610 Waterbar.
Supplier: Afro Chemical and Steel plc
Download PDF file.
|
|
3
. |
|
Nitoproof 230* (FOSROC)
Rubberised high build elastomeric membraneUses
Nitoproof 230 is an elastomeric high build, cold applied, rubberised bitumen. Suitable for use as a damp proof membrane on all wet area floors, walls and roofs where concrete substrate cracking may occur. Nitoproof 230 will bridge minor live cracks.
Advantages
! Single component
! Water based - non toxic
! Elastomeric
! Non flammable
! Resists attack by chloride and sulphate ions
! Asbestos free
! Suitable for horizontal and vertical application
Supplier: AB-HAM Enterprise plc
Download PDF file.
|
|
4
. |
|
Nitoproof 30 (FOSROC)
Multi-purpose, rubberised, bitumen emulsion Provides a highly effective waterproof membrane, with cost and labour saving supplementary benefits. It can be used in a wide range of applications :
- Damp proof membrane in ‘sandwich construction’.
- Dual purpose waterproofer and curing compound.
- General purpose waterproofer for walls and floors.
- Highly effective vapour seal.
- Effective as an adhesive/bonding agent for cork panels, insulation boards, expanded polystyrene etc.
Supplier: AB-HAM Enterprise plc
Download PDF file.
|
|
5
. |
|
PLY-DRAIN/GTX
PLY-DRAIN/GTX is a high strength, light and flexible one-sided cuspidate HDPE membrane with a layer of non-woven geotextile with high tensile strength and high permeability designed to replace the use of coarse aggregates in drainage systems.
Supplier: PGA Tech plc
|
|
6
. |
|
Proofex Torchseal 3p & 4p (FOSROC)
Torch applied waterproofing membraneUses To provide waterproofing and damp-proof membranes for:
�� Concrete roof and floor slabs
�� Basement tankings
�� Car park deck slabs
�� Concrete retaining structures
�� Tunnels and subways
Supplier: AB-HAM Enterprise plc
Download PDF file.
|
|
7
. |
|
Protex Non-Woven Geotextile
Polyester needle punched filter membrane produced in different densities studied for a large range of applications in civil, hydraulic, environmental and roadways engineering.
Supplier: PGA Tech plc
|
|
8
. |
|
Supercast PC*
Uses
Supercast PC is suitable for use where structural continuity is required in the filling of voids, and is typically applied in the following situations :
! Pile cap reprofiling
! General void fillin
Supplier: AB-HAM Enterprise plc
Download PDF file.
|
|
9
. |
|
Supercast PVC* (FOSROC)
Centrally and externally placed PVC waterstopsUses
The Supercast range of PVC waterstops is designed to
provide an integral sealing system for movement and
construction joints in concrete cast in-situ. These joints
typically occur in the following types of structure:
Water retaining
! Reservoirs, water towers and sewage tanks
! Dams, culverts, canals and spillways
! Swimming pools
! Bunded areas surrounding liquid retaining tanks
Supplier: AB-HAM Enterprise plc
Download PDF file.
|
|
